E2Whirlpool Dryer — Whirlpool Dryer E2 Error Code
Thermistor shorted
Severity
Critical
Difficulty
Moderate
Est. Cost
What's Happening
The thermistor is shorted — reading near zero resistance instead of its normal 10,000 ohms. The dryer may overheat or refuse to start as a safety measure. A pinched wire can also cause this.
How to Fix It
Unplug the dryer and test the thermistor. If it reads near 0 ohms, replace it. Also check the wiring between the thermistor and control board for any pinched or damaged wires that could short the sensor leads together.
Frequently Asked Questions
What does E2 mean on a Whirlpool dryer?
E2 means the thermistor is shorted — reading near zero instead of its normal resistance. The dryer won't run properly as a safety measure.
What's the difference between E1 and E2 on a Whirlpool dryer?
E1 means the thermistor has an open circuit (infinite resistance). E2 means it's shorted (near zero resistance). Both mean the sensor needs replacement.
Can a pinched wire cause a Whirlpool dryer E2 error?
Yes. If the thermistor wires are pinched together or against the chassis, it creates a short that mimics a failed sensor. Check wiring before replacing the thermistor.